Low Side Burner Cabinet w/ Drawer - 28" Patio Line

Standard Patio Line Features
(may not apply to all styles)

  • Powder coated aluminum construction
  • Made in the USA
  • 28" depth with finished back and sides
  • Deep, full extension drawers (as applicable to style)
  • Soft close doors and drawers (as applicable to style)
  • Weather sealing on all doors and drawers
  • Ventilated rear panels for grill and burner cabinets

Options and add-ons:
(may not apply to all styles)

  • Front Toe Kick
  • Rear Toe Kick
  • Side Toe Kick (with option to extend past rear leg to the full depth)
  • Casters instead of legs (excluding corner cabinets)
  • Countertops, in Stainless Steel or Powder coated aluminum (available by configuring in the Matchless Planner)

Side Burners - Built-In

The Side Burner Cabinet - Patio Line can support nearly any side or power burner that fits within our maximum cutout dimensions. Please check with your manufacturer for cutout dimensions (insulating sleeves not required). For advanced details on choosing the correct version of this cabinet, see Grill Cabinets - Sizing and Cutouts.

Your cabinet will include any necessary front trim panels for your make / model of appliance, to fill in the opening around the front controls for the built-in look.

This cabinet does not support storage of an LP tank, but does allow for gas / plumbing lines to be routed from the floor and to the appliance.

Please reach out to our team with any questions or for assistance in ordering.

PRODUCT NUMBER
DIMENSIONS W x D x H
MAX CUTOUT W x D x H
RRC-753
18Wx 28D x 28.75H
15W x 26D x 14H
RRC-754
21W x 28D x 28.75H
18W x 26D x 14H
RRC-755
24W x 28D x 28.75H
21W x 26D x 14H
RRC-757
27W x 28D x 28.75H
24W x 26D x 14H



*Assumes 1.25" thick countertops

$
Configuration

Selections not valid

Countertop Thickness
Countertops are not included, but we do need to know how thick they will be, as that factors into the overall cutout dimension of the built in appliance.

3cm and 1.25" are the most common values, but check with a countertop fabricator before ordering.

If you'd like to include countertops (made from the same powder-coated aluminum as our cabinets), those are made custom to order and requires that we know the layout of your cabinets. You can plan and price countertops by using the Matchless Planner.

Error Message

Countertop Thickness (inches - no special characters)

Error Message

Drop Kit
Drop Kits allow for a recessed install of the appliance. See "Models Supported" for more info.
Grill Cutout For (grill sold seperately)
(Select Countertop Thickness First)

Error Message

Built-In Make / Model

Error Message

Built-In Make / Model (Provide Details)
Please provide the cutout details from the manufacturer.

Visit the help link for more details.
Grill Cutout Width (inches - no special characters)

Error Message

Grill Cutout Depth (inches - no special characters)

Error Message

Grill Cutout Height (inches - no special characters)

Error Message

Grill Front Panel Width (inches - no special characters)

Error Message

Make / Model

Error Message

Griddle Insert Drop Amount
Please provide the amount of drop into the cabinet for the insert.

See our 'Resources' section for more details.
(in inches)

Error Message

Color & Finish Options

Selections not valid

Color Color
The primary color of the cabinet frame, back, sides, legs, or standalone part.

Error Message

Door & Drawer Color
(Optional) If not chosen, door and drawer fronts will be the same color as the primary selection.

Error Message

Pull Color
All options are a 3" center-to-center "bar" pull.

If "none" is chosen, doors and drawers will still be pre-drilled for a 3" center-to-center style pull.

Error Message

Door Style Upgrade
(Optional) If not chosen, standard flat panel door will be used.
Toe Kicks & Add-Ons

Selections not valid

Options changed based on current selections.

No available options

Front Toe Kick
The Front Toe Kick attaches magnetically and covers the front legs of the cabinet.
Back Panel and Toe Kick
Finished Back Panel allows for installation of back toe kick and creates a smooth finished back suitable to be seen. This option increases the cabinet depth by 1 inch, creating a toe kick profile at the back of the cabinet to which a toe kick can be added, or left open.

Back Toe Kicks are not compatible with Extended Side Toe Kicks.
The Rear Toe Kick attaches magnetically and covers the rear legs of the cabinet.

Not compatible with Extended Side Toe Kicks
Side Toe Kick - Left
Side Toe Kick encloses the side of the cabinet between front and rear leg.

The Extended Side Toe Kick (if available) extends past the rear leg to sit flush with any back panel profile, suitable for when placing a cabinet against a wall.
--or--
Side Toe Kick - Right
Side Toe Kick encloses the side of the cabinet between front and rear leg.

The Extended Side Toe Kick (if available) extends past the rear leg to sit flush with any back panel profile, suitable for when placing a cabinet against a wall.
--or--
Weather Sealing
Adds a rubber weather seal around doors and drawers. For double door cabinets only, upcharge applies in order to add a strikestrip behind the doors to seal in between.
Caster Base
The caster base will replace the cabinet legs and all toe kick options. Configured per side (left /right) with front and rear caster
Advanced setting. Contact us for assistance.
Oops! Something went wrong while submitting the form.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)